TreeServiceHarkerHeights.com

Tree work in Harker Heights, Killeen and Bell County, Texas

(254) 613-7717

Cedar Tree Removal in Harker Heights, TX

The "cedar" homeowners talk about around Harker Heights, Texas is Ashe juniper, and clearing it from a home lot needs no Harker Heights tree permit, since as of Nov 15, 2026 the city's tree chapter (Code Ch. 102) covers only public trees; even Belton, the nearby city that does have a tree permit, leaves Ashe juniper off its protected list (Belton Design Standards, April 2014 as amended June 2016, read Nov 15, 2026). The work and the price turn on how thick the stand is, how the cut brush leaves the property, and whether oaks grow in among it.

Is it really a cedar?

Not botanically. It's a juniper that goes by the cedar name. A Texas A&M Forest Service biologist quoted by Texas Highways, the Texas Department of Transportation's magazine, describes Ashe juniper as "more frequently known as 'mountain cedar'," with its densest stands in the Hill Country (checked Nov 15, 2026). The Handbook of Texas lists juniper with oak, pine and mesquite in the native cover of western Bell County, the side of the county Harker Heights is on, and Belton's tree rules write it as "Ashe Juniper (Cedar)."

Thick stand of bushy blue-green Ashe juniper with shaggy gray bark growing up to a wire fence behind a one-story limestone house
A dense band of Ashe juniper pressing against the back fence of a hillside lot.

Why do people clear cedar near the house?

Everyone has their own reason: room for grass, a view of the hills, a fence line that can be reached and repaired, more space around the oaks. Two reasons tie back to the public record for this area.

Pollen

Ashe juniper sheds pollen from December into February, and the allergy season it brings can run six to eight weeks, according to the same Forest Service biologist (Texas Highways, checked Nov 15, 2026). Cutting the trees near the house won't stop pollen drifting in from elsewhere, but some households would rather not have it at the back door.

Dry seasons

The U.S. Forest Service's 2025 forest health report for Texas says drought caused widespread decline and death across several tree species (checked Nov 15, 2026). When Bell County's judge halted outdoor burning countywide from Oct. 7 to 14, 2025, it was after Emergency Management reported 42 grass and wildland fires in seven days (KWTX news, Oct 6, 2025, checked Nov 15, 2026). Whether to thin cedar near a house is a call for each owner, but those dry stretches are real.

Do you need permission to cut cedar here?

Cedar removal rules by place (sources read Nov 15, 2026)
WhereWhat was found
Harker HeightsNo city permit for private trees on a home lot; Chapter 102 requires written permission only for public trees on city property, parks, streets and rights-of-way
BeltonAshe juniper is one of five species excluded from protection, along with chinaberry, hackberry, Chinese tallow and bois d'arc (2016 Design Standards)
KilleenA search of the city code found no permit for removing a tree on an existing home lot; landscaping rules (Killeen Code §§ 31-870 to 31-892) apply with new construction or a 30%-or-larger addition
NolanvilleA search of the city code for "tree" finds no removal permit for a private lot; cut brush goes out in 3-foot, 25-pound bundles (§ 13.02.037)
TempleLandscaping standards don't apply to single-family or duplex homes, and the Unified Development Code has no tree removal permit (Sec. 7.4.2.A)
Unincorporated Bell CountyThe county's subdivision regulations (revised Dec 2, 2024) don't mention removing trees; the County Engineer's office, (254) 933-5275, takes land development questions

Two things can still need a phone call first. Cedar within 10 feet of an Oncor pole-to-pole line is Oncor's to prune, on a Make Ready request at 888-313-6862 (Oncor, checked Nov 15, 2026). And grinding the stumps 16 inches deep or more counts as excavation under Texas law, so 811 has to hear about it two full business days before the grinder starts (Texas Utilities Code §§ 251.002, 251.151, checked Nov 15, 2026).

How does cedar clearing work on a home lot?

It depends on the lot. Cedar standing close to a house, fence or line often comes down in pieces by hand, with the brush dragged to a chipper or a pile. On a bigger, open lot, a crew may cut the trees low and move the brush with a compact loader and a grapple. Either way, ask about three things before the work starts:

  • The oaks. If live oaks or red oaks grow in or beside the cedar, the Texas A&M Forest Service wants oaks left unwounded between February and June because of oak wilt, with paint on any wound that does happen (AgriLife Today, Feb 7, 2024, checked Nov 15, 2026). A loader track or a falling trunk can scrape an oak as easily as a pruning saw. More on the oak wilt page.
  • The stumps. Cut flush, left a few inches high, or ground out. Western Bell County has shallow, stony soils in places, per the Handbook of Texas, so ask what the grinder will do if it hits rock. See stump grinding.
  • The ground afterward. Whether the crew rakes the site, leaves chips as mulch or hauls everything away.

Where does all that cedar brush go?

Cedar work leaves a pile of brush behind, and the rules for getting rid of it change at every city line.

  • Harker Heights. The city's hauler doesn't take curbside brush piles. Residents can bring their own loads, up to 4 cubic yards and two loads a day, to the drop site at 1761 FM 2410, but tree trimming companies are prohibited there (harkerheights.gov brush page, read Nov 15, 2026). Burning needs a Fire Marshal's permit, only the landowner can apply, permits are issued only for specific areas of the city, and burning without one can bring a fine of up to $2,000.
  • Killeen. Brush goes to the curb in lengths of 12 feet or less by 7 a.m. on trash day, for an added charge on the utility account, and the city's page says contractors must dispose of the brush they cut (killeentexas.gov, checked Nov 15, 2026).
  • Nolanville. The city's burn permit form lists brush, tree limbs and trees among materials unlawful to burn except in an incinerator or container the Fire Chief approves in writing; the permit is $30, due after approval, and runs 30 days (nolanvilletx.gov, checked Nov 15, 2026).
  • Outside city limits. Texas lets an owner burn trees, brush and other plant growth that came from that same property, subject to conditions such as burning at least 300 feet from any structure holding what the rule calls sensitive receptors (with narrow exceptions, such as written approval), starting an hour after sunrise and finishing an hour before sunset, staying with the fire, and skipping days with winds under 6 or over 23 mph (30 Tex. Admin. Code §§ 111.209 and 111.219, via the Cornell mirror and Texas A&M AgriLife Extension, checked Nov 15, 2026). A county burn ban overrides all of it.

Chipping is the usual alternative. HomeAdvisor lists it at $75 to $125 an hour and HomeGuide at $100 to $150 an hour (checked Nov 15, 2026).

What moves the price of cedar work?

None of the national guides read for this site prices cedar clearing on its own, so their per-tree and hourly numbers are the closest guide. For trees up to 30 feet, Angi and This Old House give $150 to $450 a tree and HomeGuide $150 to $500; haul-away runs about $70 (Angi) up to a range of $75 to $250 for each trip to the dump (HomeGuide); all checked Nov 15, 2026. On a cedar job, the number tends to follow:

  • how many trees and how tightly they're packed
  • whether a loader can get in, or everything goes out by hand through a gate
  • chipping versus hauling whole brush, given the Harker Heights drop site rule
  • stump work, and whether rock sits just under the surface
  • how many oaks have to be worked around, and in what month

The written price after a visit is what counts. Call (254) 613-7717 or send a request; the pricing page has the full tables.

Cedar questions

Is there a right season for cedar work?

Cedar isn't an oak, so oak wilt timing isn't about the cedar itself. What matters is what's around it: oaks nearby (avoid wounding them February through June), the pollen months if you're the one sneezing, and burn bans in dry stretches if the plan involves burning.

Will Harker Heights pick up a cedar brush pile?

No. The city's hauler doesn't collect curbside brush piles. Residents can self-haul within the drop site's limits; a contractor has to take their own debris away.

Can I burn the cedar I cut?

Inside Harker Heights, only with a Fire Marshal's permit at (254) 699-2688. Outside city limits, the state rules above apply unless the county has a ban in place; check the Texas A&M Forest Service burn ban map that day.

Do the stumps have to be ground?

No, that's your choice. If they are ground 16 inches deep or more, the 811 notice comes first.

A live oak over the roof, a cedar thicket on the back fence, or a stump in the mower's way?

Call or send the form. It reaches one independent contractor who works in Harker Heights, Killeen and across Bell County, Texas, and who comes out to see the tree before naming a price.

Call Request a quote